CGP Electronics DPP-24 Manual do Utilizador descarregar pdf (Página 6)

®

Job Name:

Job Number:

Model Numbers:

Page

SPECIFICATION SUBMITTAL

369-401a 6 2.3.11

GP Dimming Panels

GRAFIK Systems

®

Wiring

•Internal:PrewiredbyLutron.

•Systemcommunications:Low-voltage

NEC

® Class 2/PELV wiring connects

Dimming Panels to other components.

•Line(mains)voltage:Feed,load,and

control circuit wiring only. No other

wiring or assembly required.

Filter Chokes

•Loadcurrentrisetimeismeasuredat

a 90 degree conduction angle, with

120 V

input power.

•10-90%ofloadcurrentwaveform:

 - 350µSecrisetimeat

50%dimmercapacity.

 - 400µSecrisetimeat

100%dimmercapacity.

•0-100%ofloadcurrentwaveform:

 - 525µSecrisetimeat

50%dimmercapacity.

 - 600µSecrisetimeat

100%dimmercapacity.

•Atnopointinthewaveformcan

the rate of current change exceed

300mAperµSec.

•ConsultLutronforhigherrisetime

options.

Standards

•ComplieswithCE.

Power

•Inputpower:230V

50/60Hz,

phase-to-neutral.

•BranchCircuitCapacity:10A

 - Minimumload:25W

•NumberofCircuits:3-24

•BranchCircuitBreakers:IEC-ratedthermal

magnetic. AIC rating (other ratings avail-

able): 6000 A

•Lightningstrikeprotection:MeetsANSI/

IEEE standard 62.41-1980. Can withstand

voltage surges of up to 6000 V

and

current surges of up to 3000 A.

•10-yearpowerfailurememory:

Automatically restores lighting to scene

selected prior to power interruption.

Sources/Load Types

Operates these sources with a smooth

continuous Square Law dimming curve

or on a full conduction non-dim basis:

•Incandescent(Tungsten)/Halogen

•MagneticLow-VoltageTransformer

•ElectronicLow-VoltageTransformer

1

•LutronElectronicFluorescent

Dimming Ballasts

•MagneticFluorescentLampBallasts

•Optionalmodulesallowforcontrolof

0-10 V, DSI, and PWM load types.

•OperatesHIDsourcesonafull

conduction non-dim basis.

Dimming Cards

•Panelcurrentratingsarelistedfor

continuous operation.

•RTISS

® filter circuit technology com-

pensates for incoming line voltage

variations:Novisibleflickerwith

+/-2%changeinRMSvoltage/cycle

and+/-2%Hzchangeinfrequency/

second.

•Arcless-relayairgap-offswitches

(one per load circuit) ensure open load

circuits when off function selected.

Eliminate arcing at mechanical con-

tacts when loads are switched.

Physical Design

•Enclosure:NEMA-Type1(Type

2 available upon request), IP-20

protection; #16 U.S. Gauge Steel.

Indoors only.

•Weight:30-175pounds(14-80kg).

•Mounting:Surfacemountonly.Allow

space for ventilating.

Environment/Heat Dissipation

•Patented,ribbedaluminumheatsink

base cools Panel by convection.

No fans.

•32-104°F(0-40°C).Relativehumid-

itylessthan90%non-condensing.

Specifications - 230 V (CE)

1

Reverse-phasecontroltransformersrequireanPHPMPowerInterface.Checkphasewithtransformermanufacturer.

Power Equipment

1 2 3 4 5 6 7 8 9 10 11 ... 42 43

Comentários a estes Manuais

Sem comentários